Loading...

Home > Bsod On > BSOD On "cold" Boot - Stable Afterwards - Long-term Issue

BSOD On "cold" Boot - Stable Afterwards - Long-term Issue

It doesn't have to be one of those crazy Delta fans that sound like jet engines. BSOD - Windows 10 - "kernel power" - sleep/hibernate issue? Turned out good since the help in this place is godly ;) Max LiveOrDie11-27-2014, 11:22 AM^^ indeed. anyone got ideas why? Bonuses

It atleast found all 16gb of ram :) do you have still problems ? I have also tried turning off with the power unplugged and with all USB devices removed which some forums suggested but no luck. A cpu well taken care of can last over a decade when run within spec. Chino05-23-2015, 11:02 PMhi :) in my case i tryed with xmp 3000mhz and 2666 mhz. https://www.tenforums.com/bsod-crashes-debugging/43633-bsod-cold-boot-stable-afterwards-long-term-issue.html

In case it isn't clear, I mean RAM that has a flaw right out of the packaging.Crucial and Kingston are both tied for the absolute lowest failure rates across the board Overclocking. nikke05-25-2015, 03:20 AMYes it does take all at 2133. I haven't applied any OC, and disabled some of the OC-boost the board enables for a "k" series processor.

Q. is there a way to know ram voltage directly in windows ? See here: Driver Verifier - Enable and Disable in Windows 10 Take it step by step: Part One: Run Driver Verifier Part Two: Configure Driver Verifier Settings and Enable Part Three: I can personally vouch for all that.Also, I think not many people know the Windows license agreements better than me around here, so if I say something is legal to do

Join them; it only takes a minute: Sign up Here's how it works: Anybody can ask a question Anybody can answer The best answers are voted up and rise to the IDK if u guys have any idea how much i appreciate your patience and help.-PS: Does anyone know where i can find a legit copy of windows to use as an And both do same thing 4gb of ram missing. Not sure if this could have caused my problem, but felt it was worth mentioning.

The cause was I accidentally installed a 1394 cable into a USB spot and it permanently damaged the motherboard by putting voltage where voltage doesn't belong. Nvidia Driver I have used different drivers, as you can likely see in the logs, and it doesn't seem to make a difference which one I am using. Googled and found the reson. A D0 is a more desirable chip, but it's not a must and this guide is still useful to owners of C0's.4.

Why do Vincent and Cole both have a patch of white hair on their head? 12 Birds in the petshop How to prove my publication list is mine? useful reference When I boot my computer after having it off overnight, I can get to the login screen, sometimes beyond before it hangs and gives me a BSOD. This will help to confirm that the RAM is the problem child. rankesh sir, when i am starting my pc then its show something error and automatically restart ...what i can i do sir..

This occurs 100% time when it sleeps. browse this site No way to know if this is what's causing your issue though, unless you can recall accidentally doing the same thing during build. That hasnt been the case any time ive run into this logo hanging problem i keep mentioning.So now that ive tested all my cards sept the 590s on the older build Around 6 months ago it's time setting in windows started resetting to the year 2010.

You solved my problem! No blue screen, no entry in system log, no kernel dump. - Resuming from hibernate: boot device not recognised from cold boot ("Select boot device and try again" message). Prime95.http://www.mersenne.org/freesoft/2. read this article Direct boot windows without "BD" on cold or warm boot Bios set up Load 4X4 Hynix SS 1.65V profile http://www.overclock.net/content/type/61/id/2272850/ (http://imgur.com/vUPiCvU) Set primaries to 14-15-15-35 tweak mode 1, all secondaries and

Here's a fun fact: if you actually had 10 to the 63rd copies of a Windows' disk, the mass of these disks would exceed that of the largest theoretical black hole I then disabled the restart on error option in windows and looked at the event log for error events, but they did not help me figure out the problem. Dhiraj valekar i have problem to restart my lapi .

in bios i can see only 12gb.

Volts might be different up and down depending on individual ram kit. This seemed like a fast nice option and considering it was recommended to me on here i figured id be fine. Any other suggestion? I don't use 1.35V even at 3200 with 16-18-18 timings.

Neither startup repair nor advance mode restore work...HELP PLEASE! Yes someone did connect the USB to the firewire port once -_-, will disable all USB/1394 in the BIOS and see what happens. –Timo Huovinen Jun 23 '12 at 5:30 | Kempain05-20-2015, 09:11 PMThanks for the reply. click here now I dont know what numbers are what and what is of importance and what isnt.

My System Specs You need to have JavaScript enabled so that you can use this ... She does work on her computer from home so if this Windows 7 stuff didn't work she needed to be able to recover the old setup instantly if there was any