Loading...

Home > Bsod When > BSOD When Putting Laptop To Sleep.

BSOD When Putting Laptop To Sleep.

Looking at my files, I find the following: in System32 directory: wpcap.dll and packet.dll are dated 12/12/14 7:44am In System32\Drivers directory, npf.sys is dated 12/12/14 7:44am I do not see WinPCap There is likely a system service running related to (or actually is named) Winpcap. Select it and press "Remove" to uninstall WinPcap. I think the next step I should take is to manually delete wpcap.dll and packet.dll from the System32 directory and npf.sys from the System32\Drivers directory. http://sortpictures.net/bsod-when/bsod-when-putting-dell-xps-15-9530-to-sleep.html

After some research it seems to be some interface with the ASUS motherboard. It will most probably have reset driver verifier so it is now giving the impression that it has improved. So, due to automatic restore points being taken, I have now lost the 12/15 entry, as well. I am not sure how to know what applications are using the npf.sys driver, so I have no way of knowing what to stop. https://www.sevenforums.com/bsod-help-support/361347-bsod-when-putting-computer-sleep-hibernate.html

I have only three listed, and unfortunately none are before December 14. Upon restarting I see it has crashed.According to everyone on the Microsoft forums, the dump logs I have provided show that these crashes were related to Netwsw00.sys Intel® Wireless WiFi Link However, I do see that you appear to fit the criteria from Winpcap re: malware as you have the drivers but not the uninstall feature. Clean the contacts with a soft rubber (up and down not from end to end) then insert just one module and reboot to test for any change in performance.

It should be more than enough I think? Possibly this problem is caused by another driver which cannot be identified at this time. -------------------------------------------------------------------------------- Conclusion -------------------------------------------------------------------------------- 10 crash dumps have been found and analyzed. So, I did the following: 1) uninstalled NETGEARGenie from add/remove programs 2) Shutdown/restart 3) Ran ProcExp again - packet.dll and wpcap.dll and npf no longer found 4) Installed the current version Driver Verifier Manager will open.

And. . . During the installation process, WinPcap told me that there was a previous version on the system, and that the installer was not able to remove it. Hawkeye22Mar 18, 2013, 6:14 PM Make sure your bios is set to a sleep state that your processor can actually handle. directory TenPcMar 16, 2013, 2:20 PM What output is your PSU?

My reliability was quite high until mid-December when this began occurring. I also run 3 Hard drives and one SSD for the OS. samal90Mar 16, 2013, 2:26 PM I have an Antec CP850 PSU. I am not aware of any changes that I have made to this laptop.

That installation installed an update to DirectX, and a system restore point was taken at that time. http://www.techspot.com/community/topics/bsod-when-going-into-sleep-mode.162165/ What OS, Windows 7 x64?For the other hdd's (not OS ssd), disable the option to index search, this may stop the pause issue. Just below is the list of downloads for Memtest86+ V4.10. The time now is 07:53 PM. -- Mobile_Default -- TSF - v2.0 -- TSF - v1.0 Contact Us - Tech Support Forum - Site Map - Community Rules - Terms of

As you now know, you can easily adjust VSS space to coincide with your personal space demands. browse this site I should tell you that software is my strong suit; I am rather a novice when it comes to hardware issues though. If you live outside the US/Canada Region, please click the link below to get a support number for your region.World Wide Phone SupportGood Luck! Thanks in advance.

I'm also glad to hear of the increased Windows System Restore (VSS - Volume Shadow [copy] Service) space. You must delete this file manually, otherwise version 2.1 will not work properly and could cause system crashes. You must completely uninstall one of them. http://sortpictures.net/bsod-when/bsod-when-going-to-sleep.html Backup ur all needed files in ur pen drive r usb hard drive first then right click my computer select managae in that choose Disk management it will load ur drives

It has been a pleasure working with you as you made everything so easy on my side. I'm unsure what to do at this point, but I will attempt to post my latest dumps and hopefully you can further assist me. I have no programs running usually when i go to sleep mode.

It was installed on the 15th, and uninstalled shortly thereafter.

FYI, it's been around, various bits and pieces, since 1983, according to the copyrights. Nonetheless it's suggested you look for updates for the products that these drivers belong to and regularly visit Windows update or enable automatic updates for Windows. Regards. . . I installed anyway, rebooted, and now observe the following: 1) the details of wpcap.dll and packet.dll in c:\windows\system32 and of npf.sys in c:\windows\system32\drivers now show as created 2/28/13 (not 9/10/12) 2)

At the risk of overstaying my welcome. . . You may want to increase VSS space allocation if you have the HDD space available. Click on "OK" and reboot the PC. click here now Hardware specs: Mobo: GA z68x-ud3h-b3 rev 2.0 CPU: Intel Core i5 2500k Oc 4.0 Ghz Graphics card: AMD 6870 2Gb Ram: 4gb 1600mhz HDD: 500 GB spambot Windows 7 , Windows

Terms of Use Privacy Policy Licensing Advertise Articles & News Forum Graphics & Displays CPU Components Motherboards Games Storage Overclocking Tutorials All categories Chart For IT Pros Get IT Center Reply 0 0 Sparkles1 Retired Posts: 14,461 Member Since: ‎09-02-2013 Message 4 of 4 (407 Views) Report Inappropriate Content Re: BSOD when laptop goes to sleep Options Mark as New Bookmark Repeat this for every module one at a time. I am not open to doing something as drastic as a recovery back to factory.

The system returned: (22) Invalid argument The remote host or network may be down. I know Dell does.If its a custom build look into doing a memory test first, try I believe Memtest86.You will also want to make sure that your hibernate setting is disabled The crash took place in the Windows kernel. Regards. . .

By using this site, you accept the Terms of Use and Rules of Participation I'm not sure if you can take a look at my dump files to see if i overlooked something, i would appreciate it. On Wed 05/10/2011 2:39:23 PM GMT your computer crashed crash dump file: C:\Windows\Minidump\100511-38953-01.dmp This was probably caused by the following module: ntoskrnl.exe (nt+0x7CC40) Bugcheck code: 0x9F (0x3, 0xFFFFFA800306A360, 0xFFFFF80000BA2748, 0xFFFFFA8004F14CF0) Error: I thank you for that.

That, and the fact that it seems to be stomping on another program from time to time :) Norton had not picked up anything in any of its regular quickscans, and jcgriff2 ` __________________ BSOD Posting Instructions - Windows 10, 8.1, 8, 7, Vista `` ` `Driver Reference Table (DRT) jcgriff2 BSODs ▫ Hex Date Conversion Microsoft MVP 2009-2015 01-03-2015, 07:36 That's a shame about your system restore points. If the PC reboots normally then there is no problem with any of the drivers.

I have Windows 7 home premium and lately ive been having this problem and i thought i had it fixed but it started happening again... Doing System Restore has not resolved the problem.Right now, my solution has been not to allow the laptop to go into sleep mode. All Rights Reserved. This is from my Windows 8.1 system; Windows 7 may appear differently - For info, one of the best built-in tools within Windows for displaying installed programs is the Reliability Monitor

okay i saw the link but i dont know what to download if those are service pack 1 for windows 7 i think my computer already installed those updates... For info, I have mine set at 12% (~120 GB) - Windows System Restore - Configure Restore Point Space (Windows 10,8.1, 8, 7 & Vista) - Sysnative Forums Thanks for the Check that box and see if any additional Windows Updates restore points appear. NTOSKRNL.EXE is a operating system file.