Loading...

Home > Bsod While > BSOD While Installing Vista X64

BSOD While Installing Vista X64

bummer....moreover, the WD Passport has very low throughput, it takes more than two hours to copy all that stuff on it..... I boot into the DVD, it goes thru the pretty animation of the flying flag parts, then to a blue screen (not the bsod yet) with a pretty pic on it, Yes, my password is: Forgot your password? The first and second try I got BSOD. http://sortpictures.net/bsod-while/bsod-while-installing-drivers-of-gtx-780.html

Swapped one for the other in the same slot (dimm slot 0) no dice. Log in with FacebookLog in with TwitterLog in with GoogleYour name or email address: Do you already have an account? I have mentioned in the original problem description (which is the first in this thread) that I ran Memtest86 and it completed successfully. I really don't want to have to spend money to get this thing fixed, but it's looking like I might have to take it to a shop Mar 29, 2011 https://www.vistax64.com/crashes-debugging/252590-blue-screen-error-while-installing-vista.html

Rewired my DVD drive from my JMicron sata controller to the nVidia sata controller (had an open slot) and... Most commonly it results from overheating, from failed hardware (RAM, CPU, hardware bus, power supply, etc.), or from pushing hardware beyond its capabilities (e.g., overclocking a CPU). * Have you ever I know I'm quite late with this, but I've just completed a month of trial and error adjustments and found that the BSD with a message as follows " page fault Skill RAM and replaced with my older 2 gigs of Corsair Dominator.This all worked and I installed 64bit with no issues.Funny thing was I was able to replace the 4 gigs

Then burn it again. #4 robert3892, Jan 17, 2009 joshep_c New MemberJoined:Jan 15, 2009Messages:6Likes Received:0 Same problem I have the same problem on my desktop and my laptop. The error you are giving us usually indicates a memory issue - Ensure all voltages and timings are set per the maker's recommendations. 1066 RAM is basically 'Factory Guaranteed Overclockable' - I had two sticks of 2gig crossfire memory and one stick of standard. TechSpot Account Sign up for free, it takes 30 seconds.

Did a binary compare to the original one I downloaded. Mar 28, 2011 #11 mglass2k9 TS Rookie Topic Starter Posts: 19 There is another machine in the house. I have no idea if this is going to be helpful to anyone else, but I hope so. http://www.tomshardware.com/forum/237736-44-bsod-vista-install I didn't even think to check the memory voltage.

You may also... Can't find your answer ? Mar 28, 2011 #13 mglass2k9 TS Rookie Topic Starter Posts: 19 Well I just cleaned it out. One thing that confuses me is that I hear folks talking about downloading drivers for vista/xp to overcome compatibility issues.

solved Catalyst 14.12 BSOD during install...and other problems BSOD When Loading Crysis in Vista 64-bit Vista 64-bit BSOD BSOD with 64bit Vista More resources See also solved Dell Dimension 2400 BSOD However I won't have access to it until later. Well, let's see the portable storage I have: 1 GB SD cards for photos, a 2GB DataTraveller stick (which is insufficient for storing the image) and a 160 GB Western Digital MACHINE_CHECK_EXCEPTION Mar 28, 2011 #6 mglass2k9 TS Rookie Topic Starter Posts: 19 Yet another new error.IRQL_NOT_LESS_OR_EQUAL STOP:0x0000000A Mar 28, 2011 #7 mglass2k9 TS Rookie Topic Starter Posts: 19 Sigh..now

Reboot and repeat as often as it takes. http://sortpictures.net/bsod-while/bsod-while-installing-from-network-share.html install with 2GB?Do you have the most up to date Bios for your board?? (Meaning obtained directly from the maker - Not the one on the disc that came in the Was working fine for the past year or so with a few random bsods here and there. Is this system from the likes of Dell, HP, etc., or did you or a friend build this system? 3.

I know I'm quite late with this fix, but I just found out that a BSD with the message that reads " Page fault in nonpaged area" is a memory problem. Its hitachi deskstar 500gb. So I formated my drive via the vista disc that came with my pc. click here now I had an XP setup work with 1066RAM, but Vista kept crashing, with the same two errors you got.

If that doesn't rectify the issue here is a simple and sometimes tedious but tried and true method: Uninstall everything from your motherboard except power cable, cpu, and RAM. Dismiss Notice TechSpot Forums Forums Community Ask a Question Today's Posts BSOD when trying to install Vista64-bit Bymglass2k9 · 31 replies Mar 28, 2011 Post New Reply Page 1 of 2 What makes it so difficult is that it can be any hardware in your system -- and I mean any.

Now that I've gotten W7 installed and running, I rewired the DVD drive back to the JMicron SATA port and it all works fine (meaning that W7 is still operating and

Can't really afford to buy new parts or a new pc. My secondary school teacher's salary is $540 a month. Should I try to boot from a SATA DVD from the Silicon Image 3114 controller on my board? Mar 28, 2011 #17 mglass2k9 TS Rookie Topic Starter Posts: 19 Okay the system was premade about 2 years ago from cyberpower pc.

I really only used it for gaming. This machine is pretty dusty. No errors or anything, it just restarted. browse this site Spray in short bursts 6 inches away and clear the heat sink and fan of all dust. 5.

Now that I've gotten W7 installed and running, I rewired the DVD drive back to the JMicron SATA port and it all works fine (meaning that W7 is still operating and First, do you have access to another system and second, what is the make of your harddrive? Binary equivalent. I've checked the cables and theyy seem to be alright.

I just did it a few minutes ago . KnighthisJun 17, 2009, 11:19 PM I had the same BSOD issue a few weeks ago when I installed Vista 64bit on a new V Raptor HD.After a few attempts with the Mar 28, 2011 #16 Route44 TechSpot Ambassador Posts: 11,966 +70 Okay, here is what we need: 1. Ask a question and give support.

Spec wise for me its OS:vista64 Gpu:msi 460gtx Power supply:corsair TX650w Mobo:MSI(not sure of the model make) Ram 2xkingston ddrII 2gig sticks Cpu:intel core 2 quad Mar 28, 2011 #18 I've tried 2 different moniters and I'm not getting a signal from either my gpu or the onboard gpu. All Rights Reserved Tom's Hardware Guide ™ Ad choices Login _ Social Sharing Find TechSpot on... After I posted that, I thought I would cross my fingers and begin eliminating pieces of hardware to see if any one specific thing was causing the problem.

Any help is appriciated no matter how long it takes. If the latter please give us the hardware specs: motherboard make and model, type and amount of RAM installed, video card make and model, power supply make and model as well i thought it might have been the version i was trying to install (32bit) and so i switched to the 64 bit (amd 64 black edition 5000+) but no change i After about 10 times it'll have payed itself back.

Any other suggestions? Login now.